Durva Enterprise supplies raw biomass and bio-coal from South Gujarat, and builds the pellet mills, grinders, mixers, conveyors and dryers that turn it into fuel — with support to set up the whole line, not just one machine.
We're Durva Enterprise, based in South Gujarat, sitting on top of the raw material most biomass mills need — bagasse, wood chip, bamboo and agricultural waste, plus bio-coal, sourced right here in Dolvan, Tapi.
We also manufacture the machinery that processes it: pellet presses, grinders, mixers, conveyors and dryers, built for both small setups and full-scale mill projects. If you're starting a biomass line from scratch, we can support the entire project, not just sell you one machine.
Bagasse, wood chip, bamboo and agri waste, supplied at the volumes a mill actually needs.
Five machines cover a full biomass line — feeding, grinding, mixing, pressing and drying. Every model is available across a range of motor sizes, in mild steel or stainless construction.
The core press: raw biomass in, dense fuel pellets out. Gearbox-driven, built on a mild steel or stainless frame for continuous mill use.
Reduces raw biomass to a consistent particle size before pressing, so the pellet machine runs clean and the finished pellet holds together.
Ribbon-blade mixer for blending feedstock and binders evenly before it reaches the press, sized to match your batch volumes.
Moves material between stages of the line — from grinder to mixer, mixer to press — without manual handling.
Rotary drum dryer that brings wet feedstock down to a moisture level the press can handle, manually fed, with a choice of heat source.
Hole size and compression ratio are matched to the feedstock — bagasse behaves differently under pressure than wood chip or bamboo — so the die on your machine is set up for what you're actually running.
Bagasse, wood chip, bamboo and agri waste supplied directly from South Gujarat, at mill volumes.
Pellet mills, grinders, mixers, conveyors and dryers manufactured in-house, across a range of motor sizes.
We help plan and set up complete small and large mill projects, end to end.
Whether it's one machine or a full mill line, get in touch with your capacity and feedstock, and we'll put together what you need.